Always test a small sample to ensure that the desired result is achieved before proceeding with the main project. If in doubt, do not proceed.

The surface to be treated should be dry and free from any fat/oil. (Any remains of linseed oil can result in black flecking.) Do not use as a treatment after Nanolia-Prodeck. Do not work with the product at a temperature of less than 5 °C.

Do not dilute. Shake well. The two parts should be mixed completely. The moisture contents of the wood should not exceed 18%. Apply the product with a brush in a thin coating in two layers. After a drying period (dependant upon the moisture of the atmosphere and the absorption of the wood – a period of about 4 to 6 hours), the second coating may be applied. The longer the drying period, the more effective the protection. The intensity of the wood structure and the colour depend upon the method of application and it is therefore recommended to make a trial application. Make sure that the surface is completely dried when applying Nanolia-Prodeck afterwards. It may take several days to have a completely dry surface.

All working tools can be cleaned with water and detergent after use. Details in the application vary depending upon the surface to be coated. We are happy to advise you fully in these cases.

1 litre bottle, 5 litre canister, 10 litre canister. Other packing forms/sizes are possible after prior consultation with us and according to the transport possibilities/regulations.

The product may be stored for at least 12 months in its original packing. Do not store this product below 5°C or above 30°C.

Empty packing may be disposed of in the domestic waste. Remaining product must be disposed of according to the local laws and regulations or it must be taken to the community collection point for such materials.

When using this product please take note of these instructions. We wish to make it clear that the use of chemical preparations should only take place when the safety measures are observed and are always out of the reach of children. The technical information given here is according to the latest technical knowledge and compiled from our own experience. In view of the many uses possible with this product it is therefore the responsibility of the user to act according to the given situation in respect of safety – that is to say the user acts upon their own responsibility in any given situation when using this product. That the use of this product takes place out of our jurisdiction, we have set out safety and protection measures, but we cannot be held responsible in any circumstances. For any misuse of the product we cannot be held responsible. In the event of a new version of this information becoming available – this information here set out is no longer valid.