- Water-based, ideal for indoor use
- No oil, no paint – no visible change to the treated material
- Water and oil – even red wine- are resisted and cannot be absorbed into the wood
- Reduction of soiling/dirtying of the product with cleaning also made much easier
- Non-toxic and compliant with DIN EN 71 parts 3 and 9 “safety for toys”
- Resistant to seawater, salt spray and acid rain
- Free of silicones, waxes and oils
- Retains “working-properties” for up to 3 years without any rubbing-off
- High coating efficiency due to the very thin required coating application
Wood ProDeck™
Wood Prodeck protects woods – especially hardwoods – against water saturation, swelling and rotting. Its breathing and practically invisible coating allows water and oils to simply “pearl-off” taking dust and dirt away. Dirt and stains simply cannot penetrate the wood and therefore there is no marking or flecking. Even in extreme cases of exposure to rain or condensation, the wood absorbs absolutely no moisture – it just remains on the surface where it can be easily wiped off or just allowed to evaporate. This means that drying time is drastically reduced and with no moisture in the pores of the wood, damage from frost prevented. The product is ideal for all types of wood including untreated, absorbent and even pressure- impregnated structural timber. It is able to be used both for indoor and outdoor purposes.
In outdoor situations such as garden decking, bench seats and pergolas where moss, fungus, rot and algae are likely we recommend the use of Wood Prodeck AB which is an extended function version of Nanolia’s Wood Prodeck.
Technical Data: | |
Mixing proportions | Body: Hardener = 5.5: 1 (volume or weight) |
Dilution | Not dilutable |
Finish | silk matt |
Colour | Transparent |
Layer thickness: | approx. 5 – 20 μm (dry) |
Temperature range | -40°C – > 350°C |
Pot life | approx. 4 hours (at 20° C) |
Dust drying time* | approx. 6 hours (at 20° C) |
Completely hardened*: | approx. 7 days (at 20° C) |
HVLP Spray | Nozzle: 0.8 mm; Pressure: 2.0 bar |
Spread rate on painted brick-work: | approx. 40m ² – 50m ²/kg |
*Application at ambient temperatures below 10 °C can extend the drying times ! |