Always test a small sample to ensure that the desired result is achieved before proceeding with the main project. If in doubt, do not proceed. Do not dilute. Shake the container well. The two phases should be mixed completely. Work at a temperature between +5 and +25 °C. In the case of sensitive surfaces (i.e. acrylic) scratching may occur – therefore make a test on a suitable part of the surface to be treated. Do not use on surfaces which are sensitive to acids such a marble or other natural stone types. First clean the surface of any severe dirt/dust/soiling. Apply a small amount of Nanolia Surface Protect System RESTORE using a dry and lint-free cloth. Using a circular motion and a little pressure clean/coat the surface. The very best results are achieved when using a polishing machine. After coating excess polish and dirt particles will remain on the surface. Allow first to dry for about 15 to 20 minutes and then remove the excess polish and dirt using a polishing cloth– do not use a polishing machine for this process!. For maximum gloss and a long lasting effect we recommend a prior treatment using Nanolia Surface Protect System Prep.

Treated surfaces can be easily cleaned of dust or dirt by using a damp cloth or sponge. Important: Do not wax a treated surface! When the easy-to-clean effect has eventually worn down – quite simply refresh, using the treatment method described above.

: 0,1 kg,  0,5 kg bottle, 5 kg canister, 10 kg canister. Other packing forms/sizes are possible after prior consultation with us and according to the transport possibilities/regulations.

The product may be stored for at least 24 months in its original packing. Protect from frost and direct sunlight.

Empty containers as well as any remaining product must be disposed of according to the local laws and regulations or it must be taken to the community collection point for such materials.

When using this product please take note of these instructions. We wish to make it clear that the use of chemical preparations should only take place when the safety measures are observed and are always out of the reach of children. The technical information given here is according to the latest technical knowledge and composed from our own experience. In view of the many uses possible with this product it is therefore the responsibility of the user to act according to the given situation in respect of safety – that is to say the user acts upon their own responsibility in any given situation when using this product. That the use of this product takes place out of our jurisdiction, we have set out safety and protection measures, but we cannot be held responsible in any circumstances. For any misuse of the product we cannot be held responsible. In the event of a new version of this information becoming available – this information here set out is no longer valid.