SURFACE PROTECT SYSTEM-PREP

  • Water-based, high tech polish
  • Suitable for the cleaning and brightening-up car bodywork, boats, bikes, toys, buggies, lawnmowers, caravans, motor homes, trailers, gliders and other painted, coated, moulded or laminated surfaces.
  • High Gloss polishing product designed for the removal of “heavy chalking” or soiling by oil, tar, paint remains, encrusted salts and rubber marks
  • Restores original color
  • Non-toxic
  • Free of silicones, waxes and oils


Surface Protect System –Prep™ is a high-tech, high-gloss polishing product, free from wax and silicone, designed for the removal of “heavy chalking” or soiling by oil, tar, paint remains, encrusted salts and rubber marks on plastics, glass fibre, stainless-steel and other painted surfaces. Easy to apply by hand or electric polisher it’s great for removing fingerprints from stainless-steel too!

Nanolia Surface Protect System PREP is suitable for the cleaning and brightening-up car bodywork, boats, bikes, toys, buggies, lawnmowers, caravans, motor homes, trailers, gliders and other painted, coated, moulded or laminated surfaces. While not exactly labour-free, it makes the job of restoration so much more enjoyable, especially if used with an electric polisher!

Nanolia Surface Protect System PREP should be used for the once-only preparation of weathered, faded or worn surfaces prior to treatment with Nanolia Surface Protect System COAT or RESTORE. (Note: Not for use on aluminium.)

 

Always test a small sample to ensure that the desired result is achieved before proceeding with the main project. If in doubt, do not proceed. Apply undiluted using a damp cloth (lint-free) or with a sponge, generously to the surface, ensuring a good surface coverage. Day-to-day dirt will easily be removed. Removal of heavy chalking will take more effort and is best tackled with an electric polisher. Then dry and wipe off using a dry cloth or cleaning wool/cotton wool. To obtain maximum gloss we recommend that you work use a polishing machine with a felt pad at 2.000 to 2.500 rpm. During the application make sure that there is always moisture on the surface being treated – ideally use a spray-bottle with water for this purpose.

As required

0,5 kg bottle, 5 kg canister, 10 kg canister. Other packing forms/sizes are possible after prior consultation with us and according to the transport possibilities/regulations.

: The product may be stored for at least 12 months in its original packing. Protect from frost and direct sunlight.

Empty containers as well as any remaining product must be disposed of according to the local laws and regulations or it must be taken to the community collection point for such materials.

When using this product please take note of these instructions. We wish to make it clear that the use of chemical preparations should only take place when the safety measures are observed and are always out of the reach of children. The technical information given here is according to the latest technical knowledge and composed from our own experience. In view of the many uses possible with this product it is therefore the responsibility of the user to act according to the given situation in respect of safety – that is to say the user acts upon their own responsibility in any given situation when using this product. That the use of this product takes place out of our jurisdiction, we have set out safety and protection measures, but we cannot be held responsible in any circumstances. For any misuse of the product we cannot be held responsible. In the event of a new version of this information becoming available – this information here set out is no longer valid.

 

Technical Data:
Mixing proportions As Delivered
Dilution Not dilutable
Finish Gloss
Colour Chalky white / Transparent
Layer thickness: approx. 1 – 2 μm (dry)
Temperature range 5°C – > 35°C
Pot life approx. 6 hours (at 20° C)
Dust drying time* approx. 5 mins (at 20° C)
Number of applications required: 1
Polishing Machine with felt pad 2000-2500 rpm
Spread rate: approx. 45m ² – 50m ²/kg
*Application at ambient temperatures below 10 °C can extend the drying times !