Always test a small sample to ensure that the desired result is achieved before proceeding with the main project. If in doubt, do not proceed. Do not dilute. The surface to be treated should be clean and free from any fat/oils. Make a test on an appropriate part of the surface first to ensure suitability (because of the solvent content). Apply a small amount of Nanolia Surface Protect System COAT using a clean duster (i.e. a cotton cloth). Apply thinly and covering the whole surface area. After a waiting time of about 15 to 20 minutes a film will become visible and this should be polished off using a soft cloth. After about 1 hour the chemical binding process on the surface is complete. The treated surface can quite simply be easily cleaned of any dust/dirt using a damp cloth or sponge. Do not apply any waxes to the treated surfaces. Should the effect wear down, quite simply refresh by repeating the treatment method described above.

As required

0,1 kg,  0,5 kg bottle, 5 kg canister, 10 kg canister. Other packing forms/sizes are possible after prior consultation with us and according to the transport possibilities/regulations

The product may be stored for at least 24 months in its original packing. Protect from frost and direct sunlight.

Empty containers as well as any remaining product must be disposed of according to the local laws and regulations or it must be taken to the community collection point for such materials.

When using this product please take note of these instructions. We wish to make it clear that the use of chemical preparations should only take place when the safety measures are observed and are always out of the reach of children. The technical information given here is according to the latest technical knowledge and composed from our own experience. In view of the many uses possible with this product it is therefore the responsibility of the user to act according to the given situation in respect of safety – that is to say the user acts upon their own responsibility in any given situation when using this product. That the use of this product takes place out of our jurisdiction, we have set out safety and protection measures, but we cannot be held responsible in any circumstances. For any misuse of the product we cannot be held responsible. In the event of a new version of this information becoming available – this information here set out is no longer valid.