Graffiti Remover Liquid and Gel

  • Used with GRAFFITI GUARD
  • Liquid is used with porous surfaces
  • Gel can be used on both porous and non-porous
  • Easily removes graffiti from treated surfaces
  • Environmentally Friendly
  • Biodegradable

GRAFFITI Removal Liquid & Gel™

Nanolia Graffiti Removal products are specifically designed for the rapid removal of all types of graffiti from surfaces that have been previously treated with Nanolia’s GRAFFITI GUARD.  They are suitable for use on previously-treated concrete, natural stone, sand-lime brick, wood, metal, glass, plastic, plexi-glass polycarbonate (Lexan, MAKROLON, etc), formica and PU coatings.

Graffiti Removal Liquid is for use on non-porous surfaces while Graffiti Remover Gel can be used on both porous and non-porous surfaces. For example, surfaces previously treated with Graffiti Guard for Porous Surfaces will still remain porous –so use Gel , while surfaces treated with Graffiti Guard for Non-porous Surfaces will be non-porous – use Liquid or Gel. Note that surfaces treated with either product will still “breathe”.

For inclined and vertical surfaces where liquids will quickly run away, the Gel would be the better choice as it has a longer dwell time in which the remover can do its job.

Nanolia’s Graffiti Removal products are easy to use, environmentally friendly and biodegradable.

 

Technical Data:
Mixing proportions Ready to use
Dilution Not dilutable
Finish Deactivate with H2O
Colour Transparent
Layer thickness: N/A
Temperature range 5° – 35°C
Pot life approx. 6 hours (at 20° C)
Activation time* approx. 15 minutes (at 20° C)
Complete Action*: approx. 15 minutes (at 20° C)
Application Spray or brush or wet wipe
Spread rate on non porous surfaces: approx. 40m ² kg
*Application at ambient temperatures below 5 °C can affect outcome

 

 

Always test a small sample to ensure that the desired result is achieved before proceeding with the main project. If in doubt, do not proceed.

Use only on dry surfaces at ambient temperature between 0° C – 35°C. Brush evenly onto the surface with a soft, natural bristle brush – do NOT use plastic bristles. The liquid version can also be sprayed. Leave between 1 and 30 minutes to dissolve the graffiti. Sometimes it may be necessary to apply a second coat of fresh cleaner in conjunction with a longer exposure time.

Do not allow the surface to dry out completely. Once the graffiti has been dissolved, it can be cleaned off. Usually wiping with a sponge is sufficient for non-porous surfaces, the use of a pressure washer at a maximum of 10-12 bar can also be used and to good effect on porous surfaces. Always rinse with plenty of water.

According to the type of graffiti, it may be necessary to repeat the cleaning process, using a longer exposure time.

  • Used cleaning equipment can be washed out with water or white spirit.
  • The resulting sludge and residues should be disposed of as special waste.
  • The waste water should be disposed of in accordance with local regulations. When correctly used it will not contaminate waste water treatment plant.
Will last at least 1 year in original sealed containers. Do not transfer remaining content to plastic containers. Do not pour remaining content down the sink! Protect from Frost and direct sunlight.
Empty containers can be disposed of with household waste. Containers with remaining contents must be disposed as hazardous waste in compliance with local regulations. Do not pour remaining content down the sink!
When using this product please take note of these instructions. We wish to make it clear that the use of chemical preparations should only take place when the safety measures are observed and always out of the reach of children.
The information in this Material Safety Data Sheet (MSDS) was obtained from sources which we believe to be reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

In the event of a new version of this information becoming available – the information set out here is no longer valid.